Hoffman VHDS36

nVent VHDS36

Hoffman VHDS36 VM3 VHDS Motion Arm, 11 to 37 lb Load Capacity, For Use With HMI Enclosure, Stainless Steel

Price:

Qty

Add To Cart

Hoffman VHDS36

Hoffman VHDS Motion Arm, Series: VM3, For Use With: HMI Enclosure, 11 to 37 lb Load Capacity, Stainless Steel, 36 in L

Corrosion resistant stainless steel housing with provisions for water drainage from arm
26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment
36 in arm supports loads of 25 to 75 lb with 20 in of vertical height adjustment
Field-adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm
Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load
Tension adjustment at front of the arm provides additional fine tuning of lifting force
No locking enclosure handle required, enclosure stays in place when repositioned
Easily interfaces with Hoffman® HMI enclosures using a 60 x 60 mm enclosure mounting pattern (enclosure must be ordered separately, not for use with CS480 enclosures)
1-1/4 in internal cable pathway maintains Type 4, 4X and 12 enclosure rating and protects wires and cables
Gasketed mounting surfaces at both ends of arm maintain seal integrity
Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments
Standard models are available with machine top mounting
Gas spring counter balance

Compliance Certificate https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/Hoffman_VHDPOST_Compliance_Certificate.pdf
Installation Instructions https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520547680600.pdf
Specification Sheet https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520590279605.pdf
Technical Drawing https://www.frenchgerleman.com/IDW_DOCUMENT_1518602944486.x-zip-compressed
Warranty https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_1520601912510.pdf