Closing Cap for profile codes E, F, G, H, K , To close profiles 440F-E0310S and 440F-E1610S

Terminator, 6k Ohm (yellow) resistor for series termination ,

Connector and Cable (diameter = 5 mm (0.20 in)) , 5 m (16.4 ft.)

Closing Cap for profile codes A, B, C, D, J , Closing Cap material: NRB

Connector and Cable (diameter = 5 mm (0.20 in)) , 1 m (3.2 ft.)

Connector and Cable (diameter = 5 mm (0.20 in)) , 2 m (6.56 ft.)

Closing Cap for profile codes A, B, C, D, J , Closing Cap material: EPDM

Terminator, 15k Ohm (blue) for parallel termination ,

Cyanocrylate Adhesive , Use Loctite 401 for dry applications.Use Loctite 380E for wet applications.

90° Corner Connector (vertical), when using 440F-E0310S ,

90° Corner Connector, when using 440F-E0110S / 440F-E0110R ,

Axial Connector , With this connector you can directly connect two profiles. Suitable for 440F-E0110S profiles.