Siemens 1LE24211AA313GA3

Siemens AC Motor, 2-Pole Continuous-Duty Low Voltage Standard Type SD100 IEEE841, Series: 1LE2, Severe Duty Motors, Squirrel Cage Motors Special Features, 2 hp, 575 VAC, 2 A, 60 Hz Frequency, 3 ph ph, 3600 rpm Speed, TEFC/IP54/IP55 Enclosure, 145TC Frame, 0.875 in Dia x 1.77 in L Shaft, Bi-Directional Rotation, 1.15 Service Factor, Ball Bearing, 2.9 lb-ft Torque, C-Face/Footless/Floor Mounting, -20 to 40 deg C, Insulation Class: Class F, Cast Iron, 4:1 Constant Torque Speed, 20:1 Variable Torque Speed, 14 in W x 7.42 in H Dimensions

• Cast iron construction for exceptional structural integrity and corrosion resistance, equipped with integrally cast feet
• Condensation T-drains provided
• Frame sizes 143T to 256T offer Siemens exclusive, leading edge, die cast copper rotor design which provides industry leading efficiencies, exceeding NEMA Premium®
• Die-cast aluminum rotor motors (143T to S449) meet or exceed NEMA Premium® efficiency levels, are dynamically balanced for extended bearing life
• Rotor assembly includes a high strength carbon steel (C1045) shaft for maximum rotor performance
• Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to reduce losses and improved efficiencies
• A unique stator core design lowers flux density while increasing cooling capacity
• Large conductor cross section reduces resistance and lowers stator losses
• Proprietary inverter rated class F, non-hygroscopic insulation system with NEMA class B temperature rise at 1 SF provides an extra margin of thermal life
• Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical surges
• Insulation system meets or exceeds NEMA mg1 2006, part 31, making all motors suitable for operation with adjustable frequency drives
• A bi-directional, non-sparking fan is locked and keyed to the shaft
• Its design reduces windage losses, improves airflow, reduces noise and provides dependable cooling
• Cast iron fan covers are provided on all frame sizes
• Regreasable, oversized single shielded bearings with cast iron inner caps
• Alemite® grease inlet fittings and automatic grease relief fittings for ease of routine maintenance
• InproSeal® bearing isolators are standard on bearing housings at both ends of the motor
• A specially formulated, high temperature tested, polyurea based grease
• Seamless, stainless steel grease filled lubrication pipes
• Oversized cast iron construction that is larger than industry standards, diagonally split, neoprene gasketed and rotatable in 90 deg increments for quick and easy connections

• Full Engineering Drawing https://www.frenchgerleman.com/ASSETS/DOCUMENTS/ITEMS/EN/Siemens_1LE24211AA313GA3_Full_Engineering_Drawing.pdf
• Specification Sheet https://www.frenchgerleman.com/ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_81373e4d618e94f87a10f5dea7644e4279ca12591382b1d9ad6f55760020e628.pdf