Send
Print
Siemens TPS3A0650X02
Siemens TPS3A0650X02 TPS3 06 Type 2 Internal Low Voltage Standard Mode Surge Protective Device With Surge Counter, 120/240 VAC, 47 to 63 Hz, 100 kA SCCR, 1 Phase
- Brand: Siemens
- MPN: TPS3A0650X02
- UPC: 804766259913
- UNSPSC: 39121610
- ASPN: SIETPS3A0650X02
- Min. Order Qty: 1
- Qty. Interval: 1
- Sold as.: EACH
Siemens Surge Protective Device, Type 2 Internal Low Voltage Standard Mode, Series: TPS3 06, 120/240 VAC Electrical Rating, 47 to 63 Hz Frequency, 3+G Wires, 100 kA Short Circuit, 500 kA Peak Surge Current, 20 kA Nominal Discharge, Modes of Protection: L-N, L-G, N-G, L-L, <0.5 ns Response, LED/Audible Alarm Indicator, 1 ph, Environmental Conditions: -15 to 140 deg F Operating, 1 to 95% Non-Condensing Relative Humidity, NEMA 1 Enclosure, Wall Mounting, Load Terminal, Aluminum, 14.7 in L x 12.8 in W x 5.2 in H Dimensions
| Type | : | Type 2 Internal Low Voltage Standard Mode |
| Series | : | TPS3 06 |
| Electrical Ratings | : | 120/240 VAC |
| Frequency Rating | : | 47 to 63 Hz |
| Number of Wires | : | 3+G |
| Short Circuit Current Rating | : | 100 kA |
| Peak Surge Current | : | 500 kA |
| Nominal Discharge Current | : | 20 kA |
| Modes of Protection | : | L-N, L-G, N-G, L-L |
| Response Time | : | <0.5 ns |
| Indicator Type | : | LED/Audible Alarm |
| Phase | : | 1 |
| Environmental Conditions | : | -15 to 140 deg F Operating, 1 to 95% Non-Condensing Relative Humidity |
| Enclosure Type | : | NEMA 1 |
| Mounting Type | : | Wall |
| Terminal Type | : | Load |
| Material | : | Aluminum |
| Dimensions | : | 14.7 in L x 12.8 in W x 5.2 in H |
- TPS TranSafe enabled - our patented TranSafe fault current protection circuitry provides peace of mind that your electronic loads are protected and that your electrical system will not go down due to SPD fault control operations
- Integral or internally mounted for optimized protection - internal surge protection dramatically reduces installation impedance allowing for superior installed suppressed voltage capabilities
- SAD/MOV hybrid suppression - for mission critical applications needing the absolute best suppressed voltage, our hybrid SAD/MOV suppressors combine tight clamping technology with integrated suppression, delivering the strongest installed protection capabilities available
- Low suppressed voltage ratings - TPS family offers some of the lowest UL 1449 listed suppressed voltage ratings available, meaning your electronics will last longer when compared to SPDs with higher ratings
- UL 96A lightning protection master labeling compliant
- Large block, individually fused, thermally protected, 50 kA MOVs
- Every MOV is monitored, including N-G
- Mounts internal to SB1, SB2, SB3 and type RCS switchboards, type WL low voltage switchgear, TIASTAR motor control centers - standard 12 in bucket, STP series bus plug on SX series busway
- All UL required OCP and safety coordination included - type 1 SPDs intended for line or load side of main disconnect, type 2 SPDs intended for load side of main disconnect
- Standard monitoring - LED indicators, dry contacts, audible alarm with silence switch and test button, rotary disconnect switch
- 5000 hits repetitive impulse
- 700 V L-N, 700 V L-G, 700 V N-G, 1200 V L-L voltage protection rating
-
Catalog
https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/Siemens_FS060P_Catalog.pdf
-
Owners/User Manual
https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/Siemens_TPS3A0110X0B2_User_Manual.pdf
-
Specification Sheet
https://www.frenchgerleman.com//ASSETS/DOCUMENTS/ITEMS/EN/Siemens_TPS3A0610X02_Specification_Sheet.pdf
